Companionway risers

I had previously made three companion way risers and a similar panel to support the middle of our bridge-deck bunk. This meant using the port bunk bulkhead as the fourth riser, however I decided it was much easier to have a separate panel which also allowed for a space to route some plumbing across the hull.

Below – Here is the fourth riser being made in the new workshop (under the boat) with a pleasant breeze blowing through.

Below – Starboard riser set being offered up.

Below – The port forward rider and the under bunk support taped in position.

Below – The starboard risers taped.

Below – Another angle for the starboard risers.